Digital Camera Operating Instructions
Advanced-Shooting
49
VQT1X05
Motion Picture Mode
Recording mode:
6
1
Slide the recording/playback switch to [
1
].
2
Press [MODE] to display to the mode selection screen.
3
Press
e
/
r
to select [MOTION PICTURE] and then press [MENU/SET].
B
C
A
4
Press the shutter button halfway to focus
and then press it fully to start recording.
A
Audio recording
• The available recording time
B
is displayed on
the top right and the elapsed recording time
C
is
displayed on the bottom right of the screen.
• After pressing the shutter button fully, release
it straight away. If the button is held down, the
sound will not be recorded for a few seconds when
recording starts.
• When the subject is focused, the focus indication
lights.
• The focus and zoom are fi xed to those set at the beginning of recording (for the fi rst
frame).
• The audio is also recorded through the built-in microphone. (Motion pictures cannot be
recorded without audio.)
5
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the picture quality
When you set the picture quality to [WVGA] or [VGA], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package for shooting motion pictures.
1
Press [MENU/SET].
2
Press
e
/
r
to select [REC QUALITY] and then
press
q
.
VQT1X05_DMC-LS85_P-PC_EN.indb 49VQT1X05_DMC-LS85_P-PC_EN.indb 49 2008/12/22 20:20:222008/12/22 20:20:22