Digital Camera Operating Instructions

Advanced-Shooting
58
VQT1X05
&
[BURST]
For details on [REC] menu settings, refer to P18.
When you press and hold the shutter button several pictures are taken in succession.
Applicable modes:
4 1 5
[OFF]
&#
Burst speed
(pictures/second)
—3

Approx. 2
Number of
recordable
pictures
h
— Max. 4
Depends on the remaining
capacity of the built-in
memory/card.
8
— Max. 7

The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the fl ash is not activated.
Note
• When the burst mode setting is set to [
#
]
– The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
– You can take pictures until the capacity of the built-in memory or the card is full.
• The focus is fi xed when the fi rst picture is taken.
• When the burst speed is set to [
&
], the exposure and white balance are fi xed at the settings
used for the fi rst picture for the subsequent pictures as well. When the burst speed is set to [
#
],
they are adjusted each time you take a picture.
• When the self-timer is used, the number of recordable pictures in Burst Mode is fi xed to 3.
• If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
• The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
• Burst Mode is not canceled when the camera is switched off.
• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
• In Burst Mode, the fl ash setting is fi xed to Forced fl ash OFF [
o
].
• Burst Mode cannot be used [HIGH-SPEED BURST] and [STARRY SKY] in [SCENE MODE].
'
[DIGITAL ZOOM]
For details on [REC] menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
1 5 6
[OFF]/[ON]
Note
• Refer to P30 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] is
set to [AUTO] or [MODE1].
• You cannot use digital zoom when ISO sensitivity is at [i.AUTO].
VQT1X05_DMC-LS85_P-PC_EN.indb 58VQT1X05_DMC-LS85_P-PC_EN.indb 58 2008/12/22 20:20:252008/12/22 20:20:25