Operation Manual

103
SQW0724
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures with Exposure Compensation
Recording mode:
Corrects the exposure when there is a backlight or when the subject is too dark or too
bright.
1
Press [ ] button ( )
2
Rotate the rear dial to compensate the
exposure
Exposure Bracket
Exposure Compensation
• You can perform the operations below while the
exposure compensation screen is displayed.
Compensates the exposure
Sets the exposure bracket (→131)
OFF
Under-exposed
Optimum
exposure
Over-exposed
Adjust the
exposure to the [+]
direction
Adjust the
exposure to the [-]
direction
3
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
You can set the exposure compensation value in the range between –5 EV and +5 EV.
Settings can be made within a range of –3 EV to +3 EV while recording motion pictures, recording
4K photos, or recording in [Post Focus].
Depending on the brightness, this may not be possible in some cases.
The set Exposure Compensation value is stored even if the camera is turned off. (When [Exposure
Comp. Reset] (→204) is set to [OFF])