User Manual

(ENG) VQT4H90 19
Taking pictures
Taking still pictures
(Shutter button)
Press halfway
(press lightly
and focus)
Press fully
(press the button all
the way to record)
Recording motion pictures
(Motion picture button)
Press
(Start recording)
Press
(End recording)
Use the zoom lever to adjust the range of the picture to
be captured
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
Select the combination of shutter speed and aperture
value (Mode dial:
)
Press the shutter button halfway to measure
the exposure
Press halfway
Rotate the rear dial to select the combination
of shutter speed and aperture value
• Perform this step while the shutter speed
and aperture value are displayed (about
10 seconds).
Select the aperture value (Mode dial: / )
Rotate the aperture ring to select the aperture value
• You can set the aperture values
between [1.4] and [8] in 1/3-stop
increments. (Set the aperture ring
where it clicks.)
Select the shutter speed (Mode dial: / )
Rotate the rear dial to select the shutter speed