Operation Manual

159
SQW0550
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
TZ100/TZ101
When selecting [ ]
You can enlarge the screen to perform more precise settings of the focus position.
• You cannot set the focus position at the edges of the screen.
Set the menu
→ [Rec] → [AF Mode]
Select [ ] and press
Use to set the focus position and press
[MENU/SET]
• The enlarged assist screen will appear for setting the focus
position.
• The assist screen can also be displayed by touching the
subject.
Move [+] to the focus position with
Operation Touch operation Description
Touch Moves [+].
— Pinch in / Pinch out Enlarges/reduces the AF area in small steps.
— Enlarges/reduces the AF area in large steps.
—
Switches the enlarged display. (windowed/full
screen)
[DISP.] [Reset] Resets [+] back to the centre.
• The image of a part of the screen can be enlarged or reduced approximately 3 to 6 times. The
image of the entire screen can be enlarged or reduced approximately 3 to 10 times.
• If you use the HDMI output during recording, the screen cannot be enlarged in windowed
mode.
• On the assist screen, it is also possible to record a picture by touching [
].