Operation Manual

179
SQW0550
Adjusting the focus and brightness (exposure)
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
1
Set the menu
→ [Rec] → [Sensitivity]
2
TZ100/TZ101
Select the ISO sensitivity by rotating the
rear dial
TZ80/TZ81
Select the ISO sensitivity by rotating the
control dial
ISO sensitivity
3
Press [MENU/SET]
• You can also press the shutter button halfway to set.
AUTO
ISO sensitivity is automatically set in a range up to 3200 (
TZ80/TZ81
with the
flash on: 1600)
*
1
depending on the brightness of a subject.
(Intelligent ISO)
ISO sensitivity is automatically set in a range up to 3200 (
TZ80/TZ81
with the
flash on: 1600)
*
1
depending on the movement and brightness of a subject.
• The shutter speed is not fixed when the shutter button is pressed halfway.
It is continuously changing to match the movement of the subject until the
shutter button is pressed fully.
TZ100/TZ101
80
*
2
/100
*
2
/125/
200/400/800/
1600/3200/6400/
12800/25600
*
2
ISO sensitivity is xed at the selected setting.
• When [ISO Increments] is set to [1/3EV], more ISO sensitivity settings can
be selected. (→181)
TZ80/TZ81
80/100/200/400/
800/1600/3200/
6400
*
2
*
1
When [ISO Limit Set] (→181) is set to other than [OFF], the ISO sensitivity is automatically set in
the range up to the [ISO Limit Set] setting value.
*
2
Only when [Extended ISO] is [ON].