Operation Manual

211
SQW0550
Functions for specific subjects and purposes
Saving a picture by selecting a focus point after recording [Post Focus]
4
Press the shutter button fully to start recording
• The focus point changes automatically while recording. When the
recording progress bar disappears, recording automatically ends.
• A motion picture will be recorded in MP4 format. (No audio is
recorded.)
• If Auto Review is set, a screen will automatically appear that lets
you select the focus point. Refer to (→214).
To record continuously, press the shutter button halfway to
display the recording screen.
Recording progress bar
Recording in post focusRecording in post focus
• To learn how to save pictures from images recorded using [Post Focus], refer to
(→214).
■
Cancelling [Post Focus]
Select [OFF] in step
2
.
• You can also cancel the [Post Focus] by selecting [OFF] of [Post Focus] in [Rec] menu.
About camera temperature
If the surrounding temperature is high, or [Post Focus] recording is performed
continuously, or the temperature of the camera rises, [ ] may be displayed and
recording may be stopped halfway through to protect the camera. Wait until the camera
cools down.
■
Limitations in [Post Focus] recording
Certain limitations apply to some recording functions, menu items and other settings.
• The following settings are fixed.
[Picture Size]
[4K] (8M)
• Following picture sizes will be applied:
[4:3]: 3328×2496 [3:2]: 3504×2336
[16:9]: 3840×2160 [1:1]: 2880×2880
[Quality]
[
]
[Shutter Type] [ESHTR]
[Rec Format] [MP4]
[Rec Quality] [4K/100M/30p]
[Continuous AF] [ON]