Operation Manual

306
SQW0550
Wi-Fi
Operating the camera by connecting it to a smartphone
Connecting to a smartphone
You can easily establish a Wi-Fi connection on this unit without entering a password on
your smartphone.
Preparation
(On the camera) Set [Wi-Fi Password] to [OFF]. (→344)
(On your smartphone) Install “Image App” in advance. (→305)
[Wi-Fi Password] is set to [OFF] at the time of purchase. In [OFF] state, a third
party can tap into the Wi-Fi transmission and steal transmitted data.
To set [Wi-Fi Password] to [ON], refer to (→308).
• It may take some time for the operation to end after operating a smartphone.
1
Select the menu on the camera
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Remote Shooting & View]
• The information required for directly connecting your smartphone
to this unit (SSID) is displayed.
• You can also display the information by pressing [Wi-Fi] button
on the camera.
• To change the connection method, refer to (→310).
SSID
2
Operate the smartphone
• The connection method differs depending on the smartphone used.