Operation Manual

311
SQW0550
Wi-Fi
Operating the camera by connecting it to a smartphone
When connecting with [Direct]
(On the camera)
Select [Direct] and press [MENU/SET]
Select [Wi-Fi Direct] or [WPS Connection]
*
, and connect the camera to the smartphone by
following the connection method (→341).
*
WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices. To check if the smartphone you are using is
compatible with WPS, refer to the instruction manual of the smartphone.
(On your smartphone)
Start “Image App” (→305)
Closing the connection
(On the camera)
1
On the recording standby screen, terminate the connection from the menu of
the camera
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
You can also terminate the connection by pressing [Wi-Fi] button on the camera (→303).
(On your smartphone)
2
Close “Image App”
<Using an iOS device>
From the “Image App” screen, press the home button on the smartphone to close the app
<Using an Android device>
From the “Image App” screen, press the back button on the smartphone twice to close the app
• When recording with [4K Pre-Burst] with the smartphone, terminate the connection only
after switching to 4K Burst recording by pressing [Q.MENU/ ] button on the camera.