Operation Manual

359
SQW0550
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
3
of “Printing” (→358)
2
Use to select the item and press [MENU/SET]
• [Multi Select]:
Scroll between pictures with , select pictures to print with
[MENU/SET] (Press [MENU/SET] again to release selection.)
Use to select [OK], and press [MENU/SET]
• [Select All]: Print all pictures.
• [Print Set (DPOF)]: Print pictures selected in [Print Set]. (→298)
• [Favorite]: Print pictures selected as [Favorite]. (→297)
3
Use to select [Print start] and press [MENU/SET]
(Print settings (→361))
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Disconnect USB connection cable (supplied) after printing.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
When the battery begins to run out during communication, a warning beep sounds. Cancel printing
and disconnect USB connection cable (supplied).
●
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable.
●
Some printers can print directly from the camera’s memory card. For details, see the manual for
your printer.
●
An orange “●” displayed during printing indicates an error message.
●
When printing a large number of pictures, the remaining sheets display may differ from the number
of pictures set for printing.
●
Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)