Operation Manual

395
SQW0550
Others
Q&A Troubleshooting
■
TV, computer, printer
No image appears on TV. Image blurred or not coloured.
• Not connected correctly (→348).
• The television has not been switched to auxiliary input.
The display on the TV and on the camera do not match.
• Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
• Card is inserted into TV.
→ Connect with HDMI micro cable and play on camera (→348).
No sound is output from the camera speaker.
• When the HDMI micro cable is connected to the camera, no sound is output from the camera.
VIERA Link (HDMI) is not working.
• Check that the HDMI micro cable is fully inserted. (→348)
• Is the camera’s [VIERA Link] setting set to [ON]? (→84)
→ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television’s remote control
(consult your television’s operating instructions for details).
→ Check the VIERA Link (HDMI) settings on the device you are connecting to.
→ Turn the camera off and on again.
→ Turn the “VIERA Link control (HDMI device control)” setting on your television (VIERA) to off and
then to on again. (Consult your VIERA’s operating instructions for details.)
Cannot communicate with the computer.
• Check whether computer has recognised camera (→355).
→ Set [USB Mode] to [PC] (→82).
→ Turn the camera off and then on again.