Operation Manual

87
SQW0550
Basics
Entering Text
Use the cursor button to enter names with the Face Recognition function and in [Profile
Setup] (babies and pets), or to register locations in [Travel Date] etc.
• Example of operation for displaying a screen:
→ [Rec] → [Profile Setup] → [SET] → [Baby1] → [Name] → [SET]
1
Use to select characters
2
Press [MENU/SET] several times until the
desired character is displayed
• [ ]: Enter a blank.
■
To change the character type
• Press [DISP.] button
• Use
to select [ ] and press [MENU/SET]
■
To continue entering characters
• Use
to select [ ] and press [MENU/SET]
• Move the zoom lever toward T side
•
TZ100/TZ101
Rotate the rear dial counterclockwise.
•
TZ80/TZ81
Rotate the control dial clockwise.
■
To edit text
Use to select [ ] [ ] and press [MENU/SET]. Then, move the
cursor to the text to edit
•
TZ100/TZ101
You can also use the zoom lever or rear dial to reposition the cursor.
•
TZ80/TZ81
You can also use the zoom lever or control dial to reposition the cursor.
Use to select [Delete] and press [MENU/SET]
Use to select the correct text, and press [MENU/SET]
3
When you are finished entering text, use to select
[Set] and press [MENU/SET]
●
Only alphabetical characters and symbols can be entered.
●
A maximum of 30 characters can be entered (maximum of 9 characters when setting names in
[Face Recog.]).
●
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (maximum of
6 characters when setting names in [Face Recog.]).