Operating instructions

28
VQT2J10
Advanced timer recording
Entering SHOWVIEW numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers or magazines.
1 Press [ShowView].
2 Press the numbered buttons to enter
the SHOWVIEW number.
Press [2] to move back to correct a digit.
3 Press [OK].
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] (> right column, step 3).
≥When “-- ---” appears in the “Channel” column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the information
of a TV station, it is kept in the unit’s memory.
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [Í] to turn the unit off.
∫ To set timer programme when VPS/PDC is “ON”
Press [2, 1] to select “VPS/PDC” and press [3, 4] to select “ON”
in step 3 (> above).
If a programme listed in a newspaper or magazine has two
S
HOWVIEW numbers, use the SHOWVIEW number for VPS/PDC.
VPS/PDC will activate when this unit is set to standby mode. While
this unit is on, recording starts and finishes at times you set initially.
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [2, 1] to move through the
items and change the items with
[3, 4].
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (> 33) except when using
Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (> 30, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥VPS/PDC (> 30)
ON!)OFF (– – –)
If the broadcasting station is not transmitting VPS/PDC
signals, “jjj” appears in the menu for timer programming
under “VPS/PDC”.
≥[HDD] RENEW (Auto Renewal Recording) (> 30)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(> 50, Entering text)
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
∫ To cancel recording when recording has already begun (> 29)
∫ To release the unit from recording standby (> 29)
∫ Notes on timer recording (> 29)
Using SHOWVIEW number to make timer
recordings
Input ShowView Number 0-9, and press OK.
ShowView
Record
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 17.08.10. 12:53:00
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 17.08.10. 12:54:00
Mode
Stop Start Channel Date
VPS
PDC
HDD
DVD
17:00 16:00 24. 8. TUE SP OFF HDD
1 ARD
Programme Name
No. Channel
ARD
01

Timer icon
TUE 17.08.10. 12:56:00
Mode Stop
VPS
PDC
HDD
DVD
HDD
Drive
space
SP
OK
20:00
OFF
Programme
Check to make sure “OK”
is displayed (> 29).
ZDF
ARD
12.10 Lizzie McGuire 1-104-525
12.30 Dunya & Desie (15) 1-902
(VPS 12.35 = 858-728)
13.00 World News 34-273
VPS/PDC numbers
Note
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later
minus one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 17.08.10. 12:53:00
Mode Stop Start No. Date
VPS
PDC
HDD
DVD
HDD
Channel
Drive
space
SP
OK
20:00
19:00
ARD
24. 8. TUE
01
OFF
New Timer Programme

Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 17.08.10. 12:54:00
Mode
Stop Start Channel Date
VPS
PDC
HDD
DVD
22:30 22:00 24. 8. TUE OFF HDD
1 ARD
Programme Name
SP
No. Channel
ARD
01

Timer icon
TUE 17.08.10. 12:56:00
Mode Stop
VPS
PDC
HDD
DVD
HDD
Drive
space
SP
OK
20:00
OFF
Programme
Check to make sure “OK”
is displayed (> 29).
DMR-EH535EG-VQT2J10_eng.book 28 ページ ２００９年１２月２２日 火曜日 午後５時５２分