Operating instructions

71
VQT2J10
Reference
Additional connections
Reference
≥To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
“Digital Audio Output” in the Setup menu (> 66)
≥When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (> 67).
In this case audio is only output from the amplifier not the
television.
≥Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
§
Only when connecting digital/satellite receiver or decoder with this unit
Setting menus
Connecting an amplifier with a digital input terminal
Required setting
OPTICAL
OPTICAL IN
Optical digital audio cable
Do not bend sharply when
connecting.
This unit’s rear panel
Insert fully, with
this side facing
up.
Amplifier’s rear panel
Connecting a television and VCR, digital/satellite receiver or decoder
RF
IN
RF
OUT
AV1
(
TV
)
OPTICAL
AV2
(
DECODER/EXT
)
AC IN
3
AV
VHF/UHF
RF IN
VHF/UHF
RF IN
AV
6
RF OUT
7
5
1
2
AV
AV
4
Digital/satellite receiver
or decoder’s rear panel
To the aerial
Aerial cable
RF coaxial cable
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
Fully wired 21-
pin Scart cable
AC mains lead
(included)
Connect only after all other
connections are complete.
21-pin Scart cable
RF coaxial cable
(included)
Cooling fan
Connecting a terminal
other than the 21-pin
Scart terminal (> 9)
Television’s rear panel
VCR’s rear panel
21-pin Scart cable
“AV2 Input” and “AV2 Connection” settings in the Setup menu (> 68)
Connect the unit directly to the television (> 8, [B])
Required setting
DMR-EH535EG-VQT2J10_eng.book 71 ページ ２００９年１２月２２日 火曜日 午後５時５２分