Operating instructions

Getting started
VQT2J59
12
Inserting the CI module
An appropriate CI module is required to view or record the encrypted broadcast.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a subscription with the
corresponding broadcaster.
≥If not watching/recording an encrypted broadcast, you do not need to insert the CI module.
1 Insert the certified Smart Card into the CAM (both optional).
2 Insert the CI module into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded. (The recording might be
prohibited by broadcasters.)
≥Depending on the CI module, a PIN may be demanded. If prompted to enter a PIN code, enter the set PIN code with the
number buttons.

≥ You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
≥ Be sure to insert the CI module horizontally into the slot.
≥ For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥ The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥ Unplug the AC mains lead before you insert or remove the CI module.
CAM
Smart Card
CI module
AC IN
10BASE-T/
100BASE-TX
LNB IN 2LNB IN 2
LNB IN 1LNB IN 1
COAXIAL
OPTICAL
L
R
AUDIO
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV1
(TV)
VIDEO
RGB/S VIDEO


AV2
(EXT)
VIDEO
RGB/S VIDEO


OUT
13V/ 18V 400mA max
COMMON INTERFACE
1
2
CI (Common Interface) slot
This unit’s rear panel
Adjust the position marks.
CI module
DMRXS385EG-VQT2J59_eng.book 12 ページ ２０１０年８月３日 火曜日 午前１１時２１分