Operating instructions
Getting started
VQT2J59
14
Connection
When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other TV connections (> 16)
Required setting:
Set “HDMI Video Mode” and “HDMI Audio Output” to “On” (> 82). (The default setting is “On”.)
≥ Supply power from another device when you use 2 or more devices to receive satellite broadcast, because this unit does not supply power when it is
turned in standby.
≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 66).
However, to perform PAUSE LIVE TV (> 26) and Direct TV Recording (> 29) for programmes that cannot be received by this unit, you need to
connect a 21-pin Scart cable.
≥ You can view only with the 21-pin Scart cable connection, without connecting an HDMI cable. Set according to the connected TV. (> 83, AV1 Output)
≥ The 21-pin Scart cable connection with the Q Link compatible TV supports “Q Link” (> 66).
Basic connections
∫ Satellite cable
≥Connect LNB IN 1 terminal to the satellite dish when you use only one terminal.
≥Connect both LNB IN 1 and LNB IN 2 to the satellite dish to record 2 programmes simultaneously or view TV during
recording.
AC IN
10BASE-T/
100BASE-TX
LNB IN 2LNB IN 2
LNB IN 1LNB IN 1
OPTICAL
L
R
AUDIO
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV1
(TV)
VIDEO
RGB/S VIDEO
AV2
(EXT)
VIDEO
RGB/S VIDEO
OUT
13V/ 18V 400mA max
COMMON INTERFACE
1
2
5
AV
HDMI IN
3
4
1 2
TV
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
Cooling fan
AC mains lead
(supplied)
HDMI cable (> 15)
Connect only after all other
connections are complete.
Satellite cable (> above)
Satellite dish
21-pin Scart cable
DMRXS385EG-VQT2J59_eng.book 14 ページ 2010年8月3日 火曜日 午前11時21分