Operating instructions

Recording
VQT2J59
32
Timer recording
1 While watching a programme
Press [STATUS ].
2 Display the channel information of a
programme to record.
Switch the programme with [2, 1].
3 Press the “Yellow” button.
4 Go to step 3 on page 31.
You cannot change “Channel” and “Day/Date”.
Press [INPUT SELECT] or [WXCH] to display the
programme to stop recording on the TV screen while
recording 2 programmes simultaneously.
1 Press [].
e.g.,
2 Select “Yes”, then press [OK].
If you have already set a weekly/daily timer recording,
the recording will start at the next scheduled time.
Depending on the state of the unit, playback may stop
when recording begins.
Timer recordings do not begin while copying in normal
speed mode.
If you turn the unit off during the timer recording, the
recording is continued.
When you programme successive timer recordings to
start, about last 1 minute of earlier programme will not be
recorded.
¾ Starting the timer recording while executing other
operation (> 98)
¾ About 2 programmes simultaneous recording (> 29)
Timer recording from channel
information
Recording disc: [HDD]
Recording mode: DR
To cancel recording when timer
recording has already begun
All DVB Channels
Now
Dolby D
Change category
/
Set timer
e.g.,
Stop Recording
Yes
No
Timer recording of this programme in progress.
Stop this timer recording ?
Recording
OK
RETURN
Notes on timer recording
Not recorded
Programme
Recorded Recorded
Programme
DMRXS385EG-VQT2J59_eng.book 32 ページ 2010年8月3日 火曜日 午前11時21分