Operating instructions

Recording
VQT2J59
33
Press [PROG/CHECK].
To exit the timer recording list
Press [PROG/CHECK].

≥ Failed programmes are deleted from the timer recording list at 4 a.m.
two days later.
Press [STATUS ].
Additional information is available for these programmes.
Select the programme, then press the “Red”
button.
≥The timer icon “F” (> left) will change from red to grey.
≥Press the “Red” button again to activate timer recording
standby. (The timer icon “F” will change to red.)
1 Select the programme, then press [OK].
2 Go to step 3 on page 31.
Select the programme, then press [DEL].
To confirm and edit a timer
programme
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is deactivated.
[ Currently recording programme
Part or all of the programme will not be recorded
since the programme is overlapping.
The disc was full.
Copy-protected programme
It was not recorded.
The programme did not complete recording
because of some reason.
Auto Renewal Recording is set (> 31).
The timer recording of the encrypted broadcast
is overlapping another encrypted programme.
Recording may not be possible.
A part or all of the programme will not be
recorded.
OK Displayed if the recording can fit in the remaining
space
>
(Date)
Daily or weekly timer programme is set. (up to a
maximum of one month from the present time)
! It may not be possible to record because:
– there is not enough space left.
– the number of possible titles has reached its
maximum. (> 103)
– programmes are deactivated.
Channel Name
Schedule
Drive/Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/64
Timer Recording
30:30 DR
HDD FRI 01.01.2010 23:05
Delete
Info
New Timer Programme



FRI 08.01
FRI 08.01
FRI 08.01
FRI 08.01
HDD
DR
HDD
DR
HDD
DR
HDD
DR
OK
OK
-->
Icons
To show a programme information
To deactivate a timer programme
To change a timer programme
To delete a timer programme
DMRXS385EG-VQT2J59_eng.book 33 ページ ２０１０年８月３日 火曜日 午前１１時２１分