Operating instructions

With Other Equipment
VQT2J59
62
Recording from external equipment
With
Other
Equip
ment
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
≥Connect the Set Top Box or VCR (> 15)
1 While stopped
Press [INPUT SELECT] to select the
input channel.
2 Press [REC MODE] to select the
recording mode.
≥DR, HG, HX, HE, HL, HM and FR mode cannot be
selected.
3 Select the channel on the other
equipment.
4 Press [¥ REC].
Recording starts.
5 Set the time to record. (> 27)
To skip unwanted parts
Press [;] to pause recording.
≥Press again to restart recording.
To stop recording
Press [∫].

≥ It will be recorded in Standard Definition quality even if the programme
is in High Definition quality.
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
≥Connect the equipment with AV2 terminal (> 15).
≥Set “AV2 Input” and “Ext Link” (> 83).
≥Make timer programming on the external equipment.
Press [EXT LINK].
“EXT-L” lights on the unit’s display
To cancel the External link
1 Turn on this unit.
2 Press [EXT LINK] to stop recording or to cancel linked
timer recording standby. (“EXT-L” disappears.)

≥ It will be recorded in Standard Definition quality even if the programme
is in High Definition quality.
≥ During Ext Link Standby mode or recording, you cannot select external
input other than AV2.
≥ This function does not work when “TV System” is set to “NTSC” (> 82).
≥ This function does not work while recording 2 programmes
simultaneously with timer recording.
≥ The beginnings of recordings may not be recorded correctly in some
cases.
≥ Programmes are recorded as one title on this unit when the end time of
the earlier timer recording and the start time of the later timer recording
are close to each other.
To divide the titles, go to “Divide Title” (> 44).
≥ When “EXT-L” lights on the unit’s display, Direct TV Recording is
unavailable.
Recording broadcasts from Set
Top Box
Linked timer recording (Ext
Link)
DMRXS385EG-VQT2J59_eng.book 62 ページ ２０１０年８月３日 火曜日 午前１１時２１分