Operating instructions

Convenient functions
VQT2J59
69
When DLNA function is deactivated, make the following
settings.
1 While stopped
Press [FUNCTION MENU].
2 Select “Setup” in “Others”, then press [OK].
3 Select “Network”, then press [OK].
4 Select “Network Settings”, then press [OK].
5 Select “Home Network ( DLNA ) Settings”, then press
[OK].
6 Select “Home Network ( DLNA ) function”, then press
[OK].
7 Select “On”, then press [OK].
≥“Power Save in Standby” in the Setup is fixed to “Off”.
(> 84)
8 Select “Registration type for remote devices”, then press
[OK].
9 Select “Automatic” or “Manual”, then press [OK].
To register equipment manually
After selecting “Manual”
in step 9 (> left)
1 Select “Remote device list”, then press [OK].
2 Select the device name or the MAC Address for the
device you want to register, then press [OK].
3 Select “Yes”, then press [OK].
To deregister equipment
After selecting “Manual”
in step 9 (> left)
1 Select “Remote device list”, then press [OK].
2 Select the registered equipment, then press [OK].
3 Select “Yes”, then press [OK].
To change this unit’s name
After performing
step 7 (> left)
1 Select “Setting device name”, then press [OK].
2 Select “Select from a preset list” or “Create name”, then
press [OK].
3 Select from a preset list
Select the preset name, then press [OK].
Create name
Enter the name. (> 71, Entering text)

≥ The maximum number of equipment that can be registered is 16.
≥ Ensure that the router for your home network has adequate security
system to prevent unauthorized access.
Home Network ( DLNA ) Settings
Automatic All connected devices on the same
network can access this unit.
Manual Only registered devices can access
this unit.
RETURN
Home Network ( DLNA ) Settings
OK
On
Automatic
Home Network ( DLNA ) function
Setting device name
Registration type for remote devices
Remote device list
DMRXS385EG-VQT2J59_eng.book 69 ページ ２０１０年８月３日 火曜日 午前１１時２１分