Operating instructions

Convenient functions
VQT2J59
80
Changing the unit’s settings
∫ Still Mode
Select the type of picture shown when you pause play
(> 107, Frames and fields).
∫ Seamless Play
Select the play mode between playlist chapter segments
and partially deleted titles.
≥If you set “On” the chapters in playlists are played
seamlessly. This does not work when there are several
audio types included on the playlist and when using Quick
View (PLAYa1.3).
∫ NTSC Video Output
Select how to output the NTSC image.
∫ Dynamic Range Compression
[DVD-V]
Change the dynamic range for late night viewing.
∫ Downmix
Select the downmix system of multi-channel to 2-channels
sound.
≥Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT terminal.
≥The audio will be output in “Stereo” in the following cases.
–AVCHD playback
∫ Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the audio type (“M1” or “M2”) when:
–Copying to a DVD-R, DVD-RW (DVD-Video format), +R
and +RW.
–“Rec for High Speed Copy” is enabled. (> 79)
–Recording sound in LPCM (> 81, Audio Type for XP
Recording).
≥When recording from the unit’s DV terminal, select the type
of audio recording from “Audio Type for DV Input” (> 81).
∫ Digital Audio Output
¾ PCM Down Conversion
Select how to output audio with a sampling frequency
of 96 kHz.
≥It will be converted to 48 kHz regardless of the setting
in the following cases.
– The signals have a sampling frequency of over
96 kHz.
– The disc has copy protection.
≥If “Off” is selected, signals are output as 96 kHz
≥If “On” is selected, signals are converted to 48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz.)
¾ Dolby Digital / Dolby Digital Plus
¾ DTS
¾ MPEG
Select the audio signal to output.
∫ Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
Picture
Automatic
Field Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
Frame Select if small text or fine patterns cannot
be seen clearly when “Automatic” is
selected. (The picture is clearer and finer.)
Sound

≥ Select “PCM” when the connected equipment cannot decode the
respective audio format.
≥ Not making the proper settings may result in noise.
DMRXS385EG-VQT2J59_eng.book 80 ページ ２０１０年８月３日 火曜日 午前１１時２１分