Operating instructions

Convenient functions
VQT2J59
81
∫ Audio Type for XP Recording
Select the audio type when recording or copying with XP
mode.
≥If “LPCM” is selected, audio quality will be raised but
picture quality will drop compared to the case when “Dolby
Digital” is selected.
∫ Audio Type for DV Input
You can select the kind of audio when recording from the
unit’s DV input terminal (> 63).
≥If “Mix” is selected, both Stereo 1 and Stereo 2 are
recorded.
≥When recording bilingual broadcast, select the type of
audio in advance from “Bilingual Audio Selection” (> 80).
∫ Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is given to
what you select.
≥This setting will give effect in the following cases.
–Convert to HG, HX, HE, HL or HM mode in “DR File
Conversion” (> 45)
∫ Language
Select the language for on-screen menus.
∫ On-Screen Information
Select the approximate time until the channel information
screen (> 24) disappears automatically.
∫ Unit’s Display
Changes the brightness of the unit’s display.
≥If “Automatic” is selected the display turns dark during play
and disappears when the unit is turned off. It reappears
momentarily if a button is pressed. While using this mode,
the standby power consumption can be reduced.
∫ Screen Saver
This is to prevent burn-in on the screen.
≥If “On” is selected, the masked-off area on the screen
becomes grey.
Depending on the condition of the unit (Connection, Setting)
the masked-off area on the screen becomes grey.
∫ Teletext
Select the Teletext (> 24) display mode.
Display
DMRXS385EG-VQT2J59_eng.book 81 ページ ２０１０年８月３日 火曜日 午前１１時２１分