Operating instructions

Convenient functions
VQT2J59
83
∫ AV1 Output
Set according to the terminal of the connected TV.
≥When a decoder is connected, do not set to “RGB 1”.
∫ AV2 Settings
Set to match the connected equipment.
¾ AV2 Input
Set to “RGB / Video” or “RGB” when receiving or
recording RGB output from external equipment.
¾ Ext Link
This setting cannot be made when the “TV System” is
set to “NTSC” (> 82).
∫ Common Interface
Access to software contained on CI module. (> 12)
≥Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.

≥ On-screen instructions may not correspond to the remote control
buttons.
≥ For more information about TV service, please contact your service
provider.
≥ Depending on the card, in some cases its use together with this unit
may be limited or not possible.
∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (> 21)
∫ Network Settings
¾ IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
¾ Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
¾ Internet Content Settings
¾ Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (> 76)
¾ Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select “Off” when the audio is warped.
¾ Home Network ( DLNA ) Settings
You can set the DLNA function (> 69)
It is also possible to change the name of this unit on the
network.
Network

≥ “Connection Speed Setting” is enabled only when “Connection
Speed Auto-configure” is turned “Off”.
DMRXS385EG-VQT2J59_eng.book 83 ページ ２０１０年８月３日 火曜日 午前１１時２１分