Operating instructions
Convenient functions
VQT2J59
84
Changing the unit’s settings
∫ Standby Settings
¾ Power Save in Standby
≥This function cannot be enabled when the DLNA
function is enabled in “Home Network ( DLNA )
Settings”. (> 69)
¾ Automatic Standby
Set the time to turn the unit to standby mode
automatically.
After the unit has finished operating, the unit will be
turned to standby mode once the set time has passed.
≥When “REWIND LIVE TV” is set to “On”(> 79), “Off”
cannot be selected.
¾ Automatic Standby after OTR
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing “Automatic Stop” or “Recording Time”
(> 27).
¾ Automatic Standby after Copy
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (> 47).
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use “DVD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote controls
with “IR6” printed at the bottom when the remote control
code of this unit is set to “DVD 4”, “DVD 5” or “DVD 6”.
∫ Clock
If the time is not set correctly, use the settings listed in the
method below.
≥Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual setting”.
≥Time Zone
When the time is not correct, set “Time Zone”.
(GMT -6 to + 6)
≥Manual setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
Others
On It will go into the “Power Save in
Standby” mode.
On Timer “Power Save in Standby” is activated
when the set time comes.
≥If the clock has not been set, “Power
Save in Standby” is activated at all
hours.
Off It is possible to start quickly from the
standby mode. (Quick Start mode)
≥ When the clock is set manually, you cannot perform playing/
recording/PAUSE LIVE TV/REWIND LIVE TV of the programmes
that are copy protected (Copying is prohibited). (> 13)
DVD
IR6
DVD
IR6
IR6
Clock
Time Date
Time Zone
Automatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
0
00
10
Automatic
On
11
2010
DMRXS385EG-VQT2J59_eng.book 84 ページ ２０１０年８月３日 火曜日 午前１１時２１分