Digital Color Imaging Systems Operating Instructions

15
Chapter 1 Basic Menu Features
1 Color Mode
Color and monochrome originals can be copied in one specified color.
The color can be selected from the basic colors (red, green, blue, yellow, magenta, and cyan) and the
registered colors.
z When the 1 Color mode is selected, the Original Type setting selection is not available.
1 Select “1 Color”.
z To display this screen, refer to steps 1 to 3 of
Selecting the Color Mode (see page 11).
2 Select “Change Color”.
z The color and the specified name are
displayed.
3 Select a color from the basic colors or
custom colors, and then select “OK”.
 When selecting a color from the basic colors
 When selecting a color from the custom colors
z When registering a custom color, refer to
New Color Registration (see page 17).
Ex: Copying a full color original in cyan.
Ex: Copying a monochrome original in cyan.
Continued on the next page...