Digital Color Imaging Systems Operating Instructions

36
Chapter 1 Basic Menu Features
Storing a Job in Memory
A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset Jobs.
z Refer to Recalling a Preset Job Stored in Memory (see page 37).
z Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
z A Proof Copy job cannot be registered in the job memory.
z “M1:”/“M2:” cannot be registered when the Manual Skyshot mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
1 Place original(s).
z Refer to Placing Originals (see page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select the copy features (see pages
10 to 35 and 42 to 105).
4 Enter the desired number of copies.
5 Select “Preset Jobs”.
6 Select “Save”, and then select a job
button without a job registered.
z The job button, in which a job has been
registered, has a job name.
7 Enter a job name, and then select
“OK”.
z Up to 20 characters can be entered.
z For instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
z After completing the editing of the job name, press
the Reset key to return to the initial screen of the
currently active mode.