Digital Color Imaging Systems Operating Instructions

37
Chapter 1 Basic Menu Features
Recalling a Preset Job Stored in Memory
The specific copy job will be done by recalling the registered preset jobs.
z Refer to Storing a Job in Memory (see page 36).
1 Place original(s).
z Refer to Placing Originals (see page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select “Preset Jobs”.
4 Select a stored job.
z Job buttons without names, indicate that
jobs are not registered.
z If the Confirmation screen “Ready for M 1
Memory Copy” is displayed, select “Close”.
5 To confirm the job settings, select
“Confirm Settings”, and then select
“Close”.
z To change the setting, refer to Confirming/
Editing the Selected Copy Features (see
page 35).
6 Press the Start key.