Datasheet

DSP
3
ds_61A05_en_dsp: 070313D
2. Specifications
Notes:
*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
Characteristics Item Specifications
Contact
Arrangement 1 Form A 1 Form A 1 Form B 2 Form A
Initial contact resistance, max. Max. 30 m (By voltage drop 6 V DC 1A)
Contact material Au-flashed AgSnO
2 type
Rating
Nominal switching capacity (resistive load) 8 A 250 V AC, 5A 30V DC 5 A 250 V AC, 5 A 30 V DC
Max. switching power (resistive load) 2,000 VA, 150 W 1,250 VA, 150 W
Max. switching voltage 250 V AC, 125 V DC
Max. switching current 8 A AC, 5 A DC 5 A AC, DC
Nominal operating power Single side stable, 2 coil latching: 300 mW. 1 coil latching: 150mW
Min. switching capacity (Reference value)*
1
10m A 5 V DC
Electrical
characteristics
Insulation resistance (Initial)
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact sets 2,000 Vrms (1 Form A 1 Form B, 2 Form A) (Detection current: 10mA.)
Between contact and coil 3,000 Vrms for 1min. (Detection current: 10mA.)
Surge breakdown
voltage*
2
between contacts and coil 5,000 V
Temperature rise (at 65C 149F) Max. 55C Max. 40C Max. 55C
Operate time [Set time] (at 20C 68F) Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20C 68F)
Max. 5 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock resistance
Functional Min. 196 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Destructive Min. 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10s.)
Destructive 10 to 55 Hz at double amplitude of 3.5 mm
Expected life
Mechanical Min. 510
7
(at 180 times/min.)
Electrical Min. 10
5
(resistive load)
Conditions
Conditions for operation, transport and storage*
3
(Not freezing and condensing at low temperature)
Ambient temperature:
–40C to +60C
–40F to +140F
Ambient temperature:
–40C to +65C
–40F to +149F
Ambient temperature:
–40C to +60C
–40F to +140F
Solder heating
250C 482F (10s), 300C 572F (5s), 350C 662F (3s)
(Soldering depth: 2/3 terminal pitch)
Max. operating speed 3 cps
Unit weight Approx. 4.5 g .16 oz
1. Max. switching capacity 2.-(1) Life curve (1 Form A 1 Form B) 2.-(2) Life curve (1 Form A 1 Form B)
10
0.1
100 1000
Contact voltage, V
Contact current, V
1
10
DC resistive
load (1a)
DC resistive load
(1a1b,2a)
AC resistive
load (1a)
AC resistive
load
(1a1b,2a)
100
10
012 43765
Switching capacity, A
No. of operations, ×10
4
265 V-130 V AC cosϕ = 1
265 V-130 V AC
cosϕ = 0.4
100
50
10
0.5 1 105
Switching capacity, A
No. of operations, ×10
4
30 V DC L/R = 7 ms
30 V DC resistive