DVD/CD PLAYER DVD-S35 Operating Instructions DVD-RAM VIDEO PLAYBACK DOWN OPEN/CLOSE DVD / CD PLAYER DVD-S35 For error-free handling of your appliance, please read these operating instructions carefully. Keep this manual for future reference.
Contents Page Precautions 3-4 CAUTION 5 Front Panel 6 Rear Panel/Batteries 7 Remote control functions 8-9 Connections 10-12 Home cinema 13-14 Basic settings 15-16 SETUP menu 17-22 Ratings 18 General playback 23-29 Other functions 30-31 Programme play 32 On-screen displays 33-35 JPEG 36 MP3/WMA menu 37 38 DVD-RAM menu General notes on DVDs 39 Before requesting service 40-41 Glossary of technical terms 42-43 Information 44 Language codes 45 Specifications 46-47 Index Last page 2 Dear customer Thank you for
Precautions Voltage: Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power sources. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Service: Do not attempt to repair this unit by yourself.
Precautions CAUTION! ! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. ! DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. ! DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.
CAUTION How to replace the fuse Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. Fuse cover 1 2. Replace the fuse and attach the fuse cover. 2 Fuse ( 5 ampere) Caution for AC Mains Lead For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug.
Front Panel 1 4 3 2 DOWN DVD-RAM VIDEO PLAYBACK ZOOM MODE UP OPEN/CLOSE DVD / CD PLAYER DVD-S35 5 7 8 1 Standby/on switch : Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Stand-by indicator : When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.
Rear Panel DIGITAL AUDIO OUT (PCM/BITSTREAM) AUDIO OUT COMPONENT VIDEO OUT PB L Y AV OPTICAL CLASS 1 LASER PRODUCT Please connect AC IN 1 PR R 2 directly to TV 3 4 VIDEO OUT 5 1 AC INPUT socket 2 Optical Digital Out terminal Audio Out socket 3 L= AUDIO output left channel R= AUDIO output right channel Batteries 6 4 Component Video Out terminal PB=Component output blue PR=Component output red Y =Component output luminance 5 Video Out terminal 6 AV Scart Output Inserting batteries int
Remote control functions 1 Standby/on switch : Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. SLEEP 1 Switches off the unit at the set time. Page 27. SLEEP SETUP OPEN/CLOSE A.SRD 1 2 3 4 5 6 7 8 9 0 10 CINEMA SETUP Displays the SETUP menu (DVD player settings). Page 17. 2 D.ENH GROUP OPEN/CLOSE Opens and closes the disc tray. Page 23.
Remote control functions 5 3 SKIP SLOW/SEARCH Skips chapters, tracks or pictures. Page 25. Slow motion and search function. Pages 23, 24. Starts playback SUBTITLE AUDIO Selects the language of subtitles. Page 34. Changes the audio track. Page 34. ANGLE/PAGE Chooses from various camera angles; turns menu pages. Page 34. QUICK REPLAY Repeats the last couple of seconds of the current playback. Page 24. Pauses playback. Page 23. Stops playback. Page 23.
Connections Note on all connections ! ! ! TV set or amplifier AUDIO IN R Unplug all units from the mains. Connect the unit directly to the TV set. If you let the player connection go through a video recorder you will experience a disturbed picture when playing copy-protected DVDs. To avoid sound quality problems, deactivate function A.SRD ( Advanced Surround ) when you connect an amplifier with Dolby Pro Logic functionality.
Connections Connection to a TV set with scart socket 1. Read the operating instructions of your TV set. 2. Connect the cables as shown on the illustrations. Make sure not to confuse the colours or labels. 3. When the unit is fully connected plug the AC mains cable back in.
Connections COMPONENT VIDEO OUT - terminal Rear of TV set (example) COMPONENT VIDEO IN terminal PR PB Y AUDIO IN R Red L The Component Video Out terminal separately outputs the colour difference signals ( PB/PR ) and the brightness signal Y, thus providing for an enhanced resolution and colour response. The labelling of the Component Video In terminal may differ depending on theTV set or monitor you use ( e.g. Y/PB/PR,Y/B-Y/R-Y, Y/CB/CR ). White 1. Read the operating instructions of your TV set. 2.
Home cinema Enjoy the powerful theater sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. Analogue connection ( AUDIO OUT ) To be able to hear sound in stereo or Dolby Pro Logic quality, attach an amplifier or an analogue audio component supporting these features.
Digital connection ( OPTICAL ) Home cinema For optimum surround sound, connect a digital amplifier or a digital audio component. Amplifier (example) Amplifier and speakers (example) OPTICAL Connect 3 or more speakers to produce surround sound Optical digital audio cable ! DIGITAL AUDIO OUT AUDIO OUT COMPONENT VIDEO OUT (PCM/BITSTREAM) L PB Y To play programmes with a 5.
Basic settings QUICK SETUP SETUP QUICK SETUP Die Menü-Sprache wählen. Select the menu language. SELECT ENTER English Français Deutsch Español Italiano Português Svenska Nederlands RETURN The items of the QUICK SETUP menu provide an easy means of making some basic settings for your appliance. When the appliance is properly connected press Stand-by/On button to switch on the unit.
Basic settings QUICK SETUP Select the subtitle language. Die Menü-Sprache wählen English. Automatic German French Spanish Italian Portuguese Swedish Select the subtitle language: If the language you want is not on the list, go to menu item "Other" and type in the appropriate language code ( see page 45 ) using the numeric key pad of your remote control unit. Other * * * * Dutch Select "Automatic" to show subtitles when the audio language is not recorded on the disc.
SETUP menu Options of the SETUP menu The SETUP menu contains options concerning menu items "Disc", "Video", "Audio", "Display" and " Others". A clearly arranged on-screen menu guides you to and through the options. SETUP DISC Disc Audio Subtitle English ! Automatic ! Menus Disc-Menüs English Ratings Level 8 SELECT TAB ENTER RETURN ! ! ! ! ! ! Press SETUP to display the SETUP screen. To select one of the SETUP sub-menus ( e.g. "Disc" ) from the tool bar, press .
SETUP menu Ratings Ratings 8 No Limit 7 6 5 4 3 2 1 0 Lock All Assign a rating to disallow the viewing of some scenes ( 1-7 ) or the entire DVD-Video disc ( 0 ). This feature is not supported by all DVD-Video discs. To select a rating ( factory setting is "8" ) When you select a rating between 0 and 7 you will be automatically prompted for a password. ! Type in a 4-digit code using the numeric key pad of your remote control unit. ! Press ENTER to confirm your entry.
SETUP menu TV Aspect : The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen). Choose the 16:9 format if your player is attached to a wide-screen TV set.
SETUP menu SETUP Audio PCM Down Conversion Dolby Digital SELECT ENTER No Bitstream DTS Digital Surround PCM MPEG PCM TAB Dynamic Range Compression Off Audio during Search On PCM Down Conversion : Pulse Code Modulation PCM is the standard method used to record digital music signals on audio CDs. DVD-Videos can be produced using the linear PCM method which is based on a sampling frequency of up to 96 kHz.
SETUP menu Menu Language : Select a menu language as appropriate. On-Screen Messages : SETUP The TV screen displays the commands you give by pressing the buttons on the remote control unit. Select "Off" to suppress the display of on-screen commands. Display Menu Language SELECT TAB On-Screen Messages FL Dimmer ENTER RETURN English On Bright FL Dimmer : You can set the brightness of the display panel elements to "Bright", "Dim" or "Auto".
Mixed Disc - Audio & Stills : SETUP menu Your DVD player can play back/display discs in the MP3/WMA ( audio ) and JPEG ( image ) formats. Select a playback format ( JPEG or MP3/WMA ) if the disc provides data in both formats. SETUP DISC Others Mixed Disc - Audio & Stills SELECT ENTER TAB Audio(MP3/WMA) DVD-Video Mode Off Demo Off QUICK SETUP No DVD-Video Mode : Playing back a DVD-Audio disc in DVD-Video mode ( "On" ) allows you to play the DVD-Video section of the DVD-Audio disc.
General playback Preparation Switch on the TV set and set it to the video input that matches the connection between player and TV set. Playback The label must face up. ! ! ! DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG Press OPEN/CLOSE to open the disc tray. Place the disc on the disc tray. Press PLAY to close the disc tray.Play back starts automatically. The player may take some time to read all of the disc information! To pause playback ! Press PAUSE during playback. ! Press PLAY to resume playback.
General playback DVD-V DVD-A RAM Scene replay VCD CD MP3 WMA WMA JPEG ! Press QUICK REPLAY during playback. Every push of the button replays a couple of seconds of the current item; on a JPEG disc it will take you back a couple of pictures. However, you cannot go back to before the beginning of an item. D QUICK REPLAY is not supported by all discs. Playing back a particular track or title DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG Type in a number using the RC unit's numeric key pad.
General playback Frame-by-frame DVD-V DVD-A RAM VCD In pause mode, press remote control buttons . Every push of one of these buttons takes the film a single frame forwards or backwards. Keeping one of these buttons pressed continuously displays the next single frame in the chosen direction. You can also use button to move the film forward a single frame at a time. D VCDs do not support a backward motion by single frames.
General playback Position memorized POSITION MEMORY VCD CD MP3 WMA WMA JPEG Use the Position Memory function if you wish to resume disc playback at a particular position. The position tag is retained when you change discs or when the unit goes into stand-by mode. You can tag and directly access up to 5 discs. This function is available only if the elapsed playback time is displayed when playing the disc. ! ! ! ! Position cleared DVD-V DVD-A RAM D Press POSITION MEMORY during playback.
General playback Automatic switch-off DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG This function allows you to specify a playback time ( e.g. 90 min. ) after which the unit is to automatically switch itself off. ! Press SLEEP, the SLEEP dialogue is output to the display and the TV screen. Repeatedly press the button to browse the settings: OFF AUTO 60 min 90 min 120 min D AUTO : The unit switches itself off 5 minutes after the end of the playback time.
General playback ZOOM VCD This function allows you to zoom into the picture to make better use of the available screen space. The setting can be changed via the remote control unit or the appliance. Using the remote control buttons: ! Press ZOOM during playback. D DVD-V : Press to display the Subtitle Position and Brightness screen, press to change the setting. ! Press ENTER and then to change the Zoom mode setting.
General playback CHAPTER REPEAT VCD CD MP3 WMA WMA JPEG ! Press REPEAT during playback. Repeatedly press the button to browse the settings as follows: DVD-V DVD-A RAM TITLE OFF DVD-V DVD-A RAM VCD/CD MP3/WMA JPEG Chapter Track Program Scene Track Track Group Title Group All Playlist All Group Off Off Off Off Off Off Off D The repeat function is available only if the elapsed time is displayed during playback.
Other functions ADVANCED SURROUND DVD-V RAM With 2 or more audio channels only Produces an effect similar to surround sound at the two front speakers ( SP ) or the headphones ( HP ). ! Press A.SRD Repeatedly press the button to browse the settings.
CINEMA Other functions DVD-V DVD-A RAM VCD JPEG You can manipulate the picture quality of films: ! Press CINEMA Cinema 1 Press Cinema 2 to select the individual settings: CINEMA 1 : Improved contrast of details of dark scenes. CINEMA 2 : Improved brightness setting for dark scenes. USER : User-defined contrast, brightness, sharpness, colour, and NORMAL : Normal : Factory default. User gamma ( brightness distribution ) settings.
Programme play Programme play PROGRAM Choose a title and chapter, then press ENTER. No 1 T C Time Play Clear 0~9 Clear all SELECT NUMBER SELECT ENTER Press PLAY to start RETURN DVD-V DVD-A VCD CD MP3 WMA You can programme up to 32 chapters/tracks to be played in any order. ! Press PLAY MODE in stop mode. The "PROGRAM" screen appears. ! Type in the numbers using the RC unit's numeric key pad. D MP3 and WMA : Press ENTER to confirm your selection. ! Press PLAY .
On-screen displays You can display on-screen information on disc and player ( OSD ) and manipulate various settings. Some DVDs do not support all of the settings. Please use the DVD menu instead. To enable the on-screen displays ! Press DISPLAY during playback. The on-screen displays will appear at the top edge of the screen. C 11 ! ! ! ! ! ! ! Digital 1 ENG 3/2. 1 ch OFF 1 ENG 11 Use the cursor keys to make or change various settings. Some entries need to be confirmed by pressing ENTER.
On-screen displays DVD-V RAM CD JPEG DVD-A VCD MP3/WMA Title or Track: Allows you direct access to a title/track if the disc hosts several. C Chapter: Allows you direct access to a chapter if the disc hosts several. G Group: MP3/WMA or DVD-A tracks or JPEG pictures defined to make up a group. You can also provoke an on-screen display by pressing the GROUP button on your remote control unit. Audio: Allows you to alter the pre-set language of synchronisation provided the disc gives you an alternative.
On-screen displays RAM JPEG DVD-V CD VCD DVD-A MP3/WMA Zoom: Zoom function ( see page 28 ). Bit Bitrate Display: Displays the video image data rate per second ( Mbps ). OSD Brightness: User-defined brightness of OSD displays. Advanced Surround: Produces an effect similar to surround sound at the two front speakers ( SP ) or the headphones ( HP ). Deactivate the function if the sound becomes distorted ( page 30 ). Dialogue Enhancer: Puts up the volume of the dialogue tone of feature films ( page 31 ).
JPEG JPEG ALBUM G P Total 1 2 2 0~9 SELECT NUMBER Group : 021112-1620 Picture : Flower 3 2 1 4 5 6 7 8 9 SELECT ENTER RETURN Prev Tree Next Your DVD player can output JPEG pictures ( Exif version 2.1 ) that were taken with a digital camera, for example, or generated by means of any other system. The resolution should range between 320 x 240 pixels and max. 6144 x 4096 pixels. Note that JPEG files must be extended by ".JPG", ".jpg", ".JPEG" or ".
MP3 / WMA menu MENU G T Total 1 1 1 0~ 9 No 1 2 3 4 5 Your DVD player can play MP3 and WMA discs ( Windows Media Audio ). Group : Tree CELEBRATE CHOSEN ONE YOUR LOVE, OH LORD I NEED YOU CHILD OF FORGIVENESS SELECT NUMBER SELECT ENTER RETURN *A Prev Find Find Next MP3 WMA CD-Text To display the MP3/WMA menu ! Press MENU to display the menu screen. ! To select a track, press , then press ENTER to confirm. The track you selected will be played.
Your DVD player can play DVD-RAM discs recorded in the video recording format, version 1.1, by a DVD video recorder, DVD video Camera, computer etc.
General notes on DVDs DVDs can contain titles and chapters that the producer of the disc put into a specific order. DVDs feature a Title menu that lists the available titles and chapters. However, you can choose to select and then play individual titles and chapters. DVD playback can be controlled and manipulated via the menu that the DVD player outputs to the TV screen. The audio tracks of many DVDs contain audio material in up to 8 languages.
Before requesting service GENERAL PROBLEMS The player does not respond to function key commands: The remote control unit does not work: Playback does not start after pressing PLAY: ! Certain control operations are not available with some discs. ! Interference caused by lightning or static charge. Press [ /I ] to put the player into stand-by mode. Restart the player. ! Check if the batteries are in the right way round (+ and -).
Before requesting service AUDIO PROBLEMS There is no audio output and the sound is distorted: The loudspeakers emit loud noise: ! Check the connections. ! Deactivate the ADVANCED SURROUND effect. ! Go to the SETUP screen and check the Audio menu settings of "Dolby Digital","DTS Digital Surround" and "MPEG". PICTURE PROBLEMS The picture is disturbed when searching: ! This is a technical issue and not indicative of a malfunction. The screen outputs no picture: ! Check the connections.
Glossary of technical terms Analogue: As opposed to the digital processing method which only knows two states ( 1 or 0, on or off ), analogue processes consist of a multitude of values at any range of infinitely variable steps. This multiplicity is faced by the limited range of possibilities of storing and reproducing the relevant information. Bitstream: Multiple-channel digital audio data prior to its decoding and assignment to the different channels.
Glossary of technical terms DTS Sound system used in cinemas or movie theaters all over the world. The system is marked by high(Digital Theater Systems): quality sound separation ( 2-channel or 5.1-channel playback ). MP3: Optical digital audio cable: MP3 or MPEG 1 Audio Layer 3 is a file compression format used for digital audio files. It provides files of an extremely small size and may cause a consequential loss of quality.
Information This product features a copyright protection implement whose technology is protected by US patents and intellectual property rights owned by Macrovision Corporation and other copyright proprietors. The use of this copyright protection implement is subject to permission of Macrovision Corporation and is restricted to purely private use only. It is prohibited to examine this appliance for the purpose of unlicensed construction. Region codes: This player accesses the region codes stored on DVDs.
Language codes Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonia Faroese 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani
Specifications Your DVD-Player can read different disc-formats: S35 DVD-Video DVD-R DVD-Audio DVD-RAM SVCD Video-CD CD CD-R/RW --R R4.7 AUDIO RAM R A M 4.7 SUPER VIDEO DIGITAL AUDIO TEXT DIGITAL AUDIO DVD-V DVD-A RAM VCD CD MP3 WMA JPEG D It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM in all cases due to the type of disc or condition of the recording.
Specifications Power supply: 220-240 Volt mains voltage, 50Hz Power consumption: 13 Watt C output level: Output socket: Power consumption in stand-by: approx. 2 Watt Dimensions: 430(W) x 260(D) x 60(H) mm Weight: 2.1 kg PAL/PAL 60 : 0.3 Vss; NTSC : 0.286 Vss (75 Ohm) 21-pin AV Scart (RGB/S-Video included) Component video output: Y output level (green): 1Vss (75 Ohm) PB output level (blue): 0.7 Vss (75 Ohm) PR output level (red): 0.7 Vss (75 Ohm) Audio output: 2 V eff.
Index Page ADVANCED SURROUND 30,35 Analogue connection 13 Audio language 15,17,34 Automatic switch-off 27 AV terminals 16,19 Basic settings Batteries Before requesting service Bitstream 15-16 7 40-41 20,42 CAUTION Chapter review CINEMA Component terminals COMPONENT VIDEO OUT Connections 5 26 31 16,19 12 10-12 General Playback Glossary Information 44 JPEG 36 Language codes Laser radiation Letterbox 45 3 19 Menu Language Menus Mixed Disc-Audio&Stills MP3 MPEG NTSC Disc Output Decoder 44 Demo 22 DI