Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-111 –
010
Sleeve
14 min.
3 min. L
=
06.3
=L16 : L±1.0
L20 : L±2.0
Pressure relief
+
–
 08
0D+0.5
F±0.5
0D+0.5
fd±0.05
■ Features
●
Endurance : 85 °C 2000 h
●
Smaller than series SU
●
RoHS directive compliant
Radial Lead Type
Series:
M
Type:
A
■ Speci cations
Category Temp. Range –40 °C to + 85 °C –25 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I
<
0.01 CV or 3 (μA) After 2 minutes
(Whichever is greater)
I
<
0.06 CV +10 (μA) After 2 minutes
tan
d
Please see the attached standard products list
Endurance
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan
d
<
150 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
Body Dia.
0
D5 6.3 8 1012.516 18
Lead Dia.
0
d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
03 Mar. 2015