Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-107 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min. L±1.0
+
–
fd±0.05
■ Features
●
Endurance : 105 °C 1000 h
●
RoHS directive compliant
Radial Lead Type
Series:
GA
Type:
A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 1.5 μF to 220 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan
d
Please see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm(not to scale)
Body Dia.
0
D4 5 6.3 8
Lead Dia.
0
d 0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k to
10 to 50 1.5 to 220 0.85 1.00 1.30 1.40 1.55
■ Frequency correction factor for ripple current
(Unit : mm)
04 Mar. 2015