Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor SMD 470 µF 2.5 V 20 % 1 pc(s)

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)

Cap. Polarity bar (Positive)

W.V. codeLot No.

P3 P1

■ Features

●

Super Low-ESR (3 m

액

)

● High temperature reﬂ ow soldering applicable

(Peak : 260 °C 10s, main heating : 230 °C 40s)

● RoHS directive compliant

Surface Mount Type

Series:

■ Speciﬁ cations

Category Temp. Range –40 °C to +105 °C

Rated W.V.Range 2 V.DC to 2.5 V.DC

Nominal Cap.Range 330 µF to 560 µF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I

0.1 CV (µA) 2 minutes

tan

0.06 (120 Hz/+20 °C)

Surge VoltageRated Working Voltage

1.25 (15 °C to 35 °C)

Endurance

After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,

capacitor shall meet the following limits.

Capacitance change ±10% of initial measured value

tan

Initial speciﬁ ed value

DC leakage cur rent

Initial speciﬁ ed value

Moisture resistance

After storing for 500 hours at 60 °C, 90 %

Capacitance change of

initial measurd val ue

2 V.DC

+70, –20 %

tan

200 % of initial speciﬁ ed value

DC leakage current

Initial speciﬁ ed value

L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3

7.3 4.3 2.4 1.9 1.3

(Unit : mm)

■ Di men sions in mm(not to scale)

✽

Externals of ﬁ gure are the reference.

(Unit : mm)

✽

Externals of ﬁ gure are the reference.

L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2

7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4

■ Marking

2 terminals 3 terminals

Oct. 201200

Summary of content (2 pages)

PAGE 1
SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Surface Mount Type Series: G ■ Features ● Super Low-ESR (3 m액) ● High temperature reflow soldering applicable (Peak : 260 °C 10s, main heating : 230 °C 40s) ● RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +105 °C Rated W.V.Range 2 V.DC to 2.5 V.DC Nominal Cap.Range 330 µF to 560 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Current I < 0.1 CV (µA) 2 minutes tan δ < 0.
PAGE 2
SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) ■ Standard Products Series & Size Code CapaciRated tance W.V. L (V.DC) (±20 %) (mm) (µF) 2 GX 2.5 330 470 470 560 560 470 470 7.3 7.3 7.3 7.3 7.3 7.3 7.3 Case Size Specification ✽1 W (mm) 4.3 4.3 4.3 4.3 4.3 4.3 4.3 H (mm) 1.9 1.9 1.9 1.9 1.9 1.9 1.9 Ripple current (Ar.m.s.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 ✽2 ESR (액 max.) 0.003 0.003 0.003 0.003 0.003 0.003 0.