Datasheet

ManualsBrandsPanasonic ManualsAluminium Electrolytic CapacitorsAluminium Electrolytic Capacitor 100 uF 200 V ±20% V-EB

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors (SMD Type)

A±0.2

( ) Reference size

0D±0.5

B±0.2

(I)

(P)

(I)

–

0.3 max.

Pressure Relief

Capacitance (µF)

Rated voltage code

Series identiﬁcation

Lot number

Negative polarity

marking (–)

EB2C

Frequency correction factor for ripple current

●

Endurance : 105 °C 3000 h to 5000 h

●

RoHS compliant

Features

Speci cations

Surface Mount Type

Series : EB (Large Can Size) Type : V

Example : 160 V.DC 10 µF

Marking color : BLACK

DimensionsMarking

Category temperature range

–25 °C to +105 °C

Rated voltage range 160 V.DC to 450 V.DC

Capacitance range 2.2 µF to 100 µF

Capacitance tolerance ±20 % (120 Hz/+20 °C)

Leakage cur rent I < 0.06 CV +10 (µA) After 2 minutes

Dissipation factor (tan d)

Please see the attached characteristics list

Characteristics

at low temperature

V.DC 160 200 250 350 400 450

(Impedance ratio at 120 Hz)

Z(–25 °C) / Z(+20 °C) 223566

Endurance

After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors

shall meet the limits speciﬁ ed below. (Size code G13 : 3000 hours, G17 : 4000 hours)

Capacitance change Within ±20 % of the initial value

tan d

< 200 % of the initial limit

DC leakage current Within the initial limit

Shelf life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Resistance to

soldering heat

After reﬂ ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.

Capacitance change Within ±10 % of the initial value

tan d Within the initial limit

DC leakage current Within the initial limit

Frequency (Hz)

Rated Voltage (V.DC)

120 1 k 10 k

f < 30 k 30 k

100 k

160 to 250 0.55 0.85 0.90 1.00

350 to 450 0.50 0.80 0.90 1.00

Size

code

LA,BH IWP K

G13 10.0 13.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20

G17 10.0 16.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20

H16 12.5 16.5±0.5 13.5 15.0 max. 4.7 0.9±0.2 4.4 0.70±0.30

J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30

J21 16.0 21.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30

K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30

K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30

R. Voltage

(V.DC)

160 200 250 350 400 450

Code 2C 2D 2E 2V 2G 2W

(Unit : mm)

Mar. 201602

Summary of content (2 pages)

PAGE 1
Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : EB (Large Can Size) Type : V Features ● Endurance ● RoHS : 105 °C 3000 h to 5000 h compliant Specifications Category temperature range –25 °C to +105 °C Rated voltage range 160 V.DC to 450 V.DC Capacitance range 2.2 µF to 100 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) Leakage current I < 0.06 CV +10 (µA) After 2 minutes Dissipation factor (tan d) Please see the attached characteristics list V.
PAGE 2
Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h (G13 : 3000 h, G17 : 4000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 160 250 400 13.5 G13 Reflow Taping (4) 250 12.5 16.5 H16 470 0.15 5000 EEVEB2C330SQ (4) 150 16 16.5 J16 600 0.15 5000 EEVEB2C470SM (4) 125 16 21.5 J21 750 0.15 5000 EEVEB2C680M (4) 75 18 16.5 K16 750 0.15 5000 EEVEB2C680SM (4) 125 100 18 21.5 K21 1060 0.