Datasheet

Compact size of 150 × 166 × 62 mm
(5.906 × 6.535 ×

2.441 in)
Low-volume fan type also available for various applications
Two exchangeable
louvers to suit your
needs
Straight louver
Removes charges
quickly at long distance
Angle louver
Standard fan type
ER-F12
Low-volume fan type
ER-F12S
Removes charges
completely in wide area
Remove the louver for
effortless maintenance
● Because the discharge needle unit is attached to the
louver, exchange or maintenance of the needles is made
easy without touching the main unit.
● A safe design where once the louver is removed, the high-
voltage circuit and the fan will halt.
● An ionizer with a 120 mm 4.724 in fan diameter that has a class leading
compact size for reducing workbench clutter and increasing efficiency.
● Low-volume fan type with a suppressed fan speed of
approx. half is available for charge removal in processes
which involve handling of small parts or thin films.
* Graphs represent typical values at 300mm 11.811 in from directly in front of air
outlet, straight louver, with no filter installed.
● Just simply replace the louver to change configu-
ration between long distance and wide area
ionization.
●
The two louvers come with the ionizer main
body.
6.0
5.0
4.0
3.0
2.0
0.0
43 2
Fan speed select switch
Fan speed [m/s]
1
6.0
5.0
4.0
3.0
2.0
0.0
43 2
Fan speed select switch
Fan speed [m/s]
1
Exchange the discharge
needle with just one click,
no tools necessary.
ER-F
SERIES
FAN TYPE IONIZER
Advanced intelligent Sensors
Conforming to
EMC Directive