Operating instructions

hrvatski
6
2. Uhvatite krajeve nastavka s češljem za bradu
i pomičite ih do željene dužine šišanja.
• Moguće podesiti u rasponu od 2,0 do 14
mm u 9 koraka po 1,5 mm.
3. Pomaknite prekidač za ISKLJ./
UKLJ. prema gore.
4. Pomičite aparat za brijanje prema
gore tako da prekidač za ISKLJ./
UKLJ. bude usmjeren prema gore,
kao na slici.
► Oblikovanje brkova
1. Pomaknite šišač za bradu
prema gore i uključite
aparat za brijanje.
2. Šišajte oko brkova.
• Ako želite izjednačenu
liniju, držite aparat za
brijanje postrance.
► Oblikovanje zalizaka
1. Pomaknite šišač za bradu prema gore i
uključite aparat za brijanje.
2. Skratite zaliske.
Čišćenje aparata za brijanje
1. Pritisnite gumbe za
otpuštanje okvira mrežice
za brijanje da biste ga
uklonili.
2. Uklonite unutarnju oštricu
tako da ju čvrsto uhvatite
na oba kraja i ravno
povučete iz aparata za
brijanje.
3. Očistite tekućom vodom.
4. Obrišite preostale kapljice
vode suhom krpom.
► Čišćenje pomoću četkice
Aparat za brijanje možete očistiti pomoću četkice za čišćenje.
Čišćenje
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53
6
English
2. Grasp the sides of the comb attachment for
beards and move it to the desired trimming length.
Adjustable by 1.5 mm from 2.0 mm to 14.0 mm
in 9 steps.
•
3. Slide the OFF/ON switch upwards.
4. Move the shaver upwards with the OFF/
ON switch facing upwards as illustrated.
Shaping your moustache
1. Slide the trimmer for beards
upwards and turn on the
shaver.
2. Trim around your moustache.
If you wish to have a rounded
line, hold the shaver on its
side.
•
Shaping your sideburns
1. Slide the trimmer for beards upwards and turn
on the shaver.
2. Cut your sideburns.


Cleaning the shaver
Clean
1. Press the foil frame release
buttons to remove the foil
frame.
2. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
3. Clean with running water.
4. Wipe off any drops of water
with a dry cloth.
Cleaning with brush
You can also clean the shaver with the cleaning brush.

ER-GY50 EU.indb 6 2010/01/15 19:19:53