Ceiling Mount Bracket Specification Sheet

285
316
142
109
218 284
215
107.5
Projector
Attachment plate
260
107.5
(12-7/16˝)
(5-19/32˝)
(4-9/32˝)
(8-19/32˝)
(11-3/16˝)
(4-7/32˝)
(10-1/4˝)
(11-7/32˝)
(8-15/32˝)
(4-7/32˝)
S PEC F ILE
ET-PKD100S
Ceiling mount bracket for low ceilings
As of December 2006 < 1 >
Specifications
Vertical correction angle: +5°, -5°
Horizontal slant correction angle: ±2.5°
Horizontal turn correction angle: ±2.4°
Dimensions (W x H x D): 507 x 151 x 425 mm
(19-31/32˝ x 5-15/16˝ x 16-23/32˝)
Weight: 8.1 kg (17.9 lbs)
Attachment plate
Illustration shows the ET-PKD100S attached to the projector.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hex bolts (M6 x 25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Washer-fitted hex bolts (M6 x 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling.
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.