FV-08VQC5 FV-11VQC5 68 Centered/ 9 11 11 11
12. Do not install with a method which is not approved in the instructions.
These Panasonic ventilating fan models are equipped with a motion sensor and a humidity sensor that turn on automatically when motion is detected, when humidity increases rapidly, or when humidity rises above a 30% ~ 80% relative humidity set-point. It is user-adjustable to operate 0.5 ~ 60 minutes after the sensors are no longer detected.
3 7/8(98) Motion sensor unit Humidity sensor unit 11 Fan body Junction box Main control circuit Red White Capacitor White Motor White Neutral Black Black Live (VENT.
Humidity preset switch Timer preset switch MIN ~30% M ~80AX % MIN ~30% MA ~80%X Humidity preset switch positions (Tolerance:±10%) MIN ~MAX ~ 30% ~ 40% ~ 50% ~ 60% ~70% ~ 80% Factory setting:~50% RH ("~" means "about") Timer preset switch positions Timer Position : refer to 0.5 minute Panasonic ventilating fan responds to: (1) Motion sensor detectible condition. (2) Humidity sensor detectible condition. Motion sensor detectible condition The delay time is determined by timer preset switch.
Motion sensor unit 6
Motion sensor unit page 4 7
fix (3 position) (Fig.6). 9. Adjust timer preset switch and humidity preset switch (Fig.7). Refer to switch indication on page 5.
CENTERED/ 9
4. Do not use cleaning sprays, solvents, or water on or near the sensors. Remove grille by pulling down the mounting spring opposite the sensor lead.
FV-08VQC5 15.5 815 FV-11VQC5 23.
T0511-0 08VQC5420