Operation Manual

5
VQT3Y11
Indemnity about recorded content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of
recording or edited content, and does not
guarantee any content if recording or editing
does not work properly. Likewise, the above
also applies in a case where any type of
repair is made to the unit (including any other
non-built-in memory related component).
Handling of built-in memory
[HC-V100M]
This unit is equipped with the built-in
memory. When using this component, pay
attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In
order to avoid erasing data due to static
electricity, electromagnetic waves,
breakage, and failures, back up the data to a
PC or disc. (l 79)
Access lamp [ACCESS] (
l
12) illuminates
while the SD card or built-in memory is
being accessed (initialization, recording,
playback, deleting etc.). Do not perform
the following operations when the lamp
illuminates. It may damage the built-in
memory or cause a malfunction in the unit.
jTurn the unit off (remove the battery)
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
About disposing of or giving away this unit.
(l 102)
About Condensation (When
the lens or the LCD monitor is
fogged up)
Condensation occurs when the ambient
temperature or humidity changes. Be careful
of condensation since it causes lens or LCD
monitor stains, fungus and camera
malfunction.
For more details about the cause and action
required for condensation, refer to page
105.
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
4 GB or more Memory Cards that do not have
the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not
based on SD Memory Card Specifications.
Refer to page 17 for more details on SD
cards.
For the purposes of these
operating instructions
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
Functions that can be used for motion
picture recording/motion picture playback
are indicated by in these
operating instructions.
Functions that can be used for still picture
recording/still picture playback are indicated
by in these operating instructions.
Pages for reference are indicated by an
arrow, for example: l 00
These operating instructions are designed
for use with models and
. Pictures may be slightly
different from the original.
The illustrations used in these operating
instructions show model ,
however, parts of the explanation refer to
different models.
Depending on the model, some functions
are not available.
Features may vary, so please read carefully.
Not all models may be available
depending on the region of purchase.
HC-V100&V100MEB_VQT3Y11_mst.book 5 ページ 2012年1月8日 日曜日 午後2時18分