Manual

Preparation

TheunitcanrecordstillpicturesormotionpicturestoanSDcardorbuilt-inmemory.Torecordtoan

SDcard,readthefollowing.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion

picture recording.

Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC

Memory Cards that can be used for motion picture recording on the following website.

http:flpanasonic.jplsupportlgloballcsle_cam

(This website is in English only.)

• Keep the Memory Card out of reach of children to prevent swallowing.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first

time on this unit, format the SD card. (4 24) When the SD card is formatted, all of the recorded data

is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the access lamp has gone off,

Access lamp

• When this unit is accessing

the SD card or built-in

memory, the access lamp

lights up.

1 Open the SD card cover and insert (remove) the SD card into (from) the

card slot O.

• Face the label side _ in the direction shown in the illustration and press it straight in as far as

it will go.

• Press the center of the SD card and then pull it straight out.

2 Securely close the SD card cover.

• Securely close it until it clicks.

VQT4T49