Operation Manual
17
(ENG) SQT1145
About the Touch Menu
∫ To display the Touch Menu
The clock is not set at the time of purchase. Make sure to set the clock.
≥ When you turn on this unit, the message “Set home region and date/time.” may be
displayed. Select [YES], and follow the steps below to make these settings:
j Step 2 of “Setting your home region for the first time”
j Steps 2–3 of “Setting date and time”
1 Select the menu. (l 25)
2 Touch the date or time to be set, then set the desired value using /.
A Displaying the World Time setting:
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and 2039.
3 Touch [ENTER].
≥ Touch [EXIT] to complete the setting.
Touch (left side)/ (right side) of on
the Touch Menu to switch the operation
icons.
≥ It is also possible to switch the operation icons by
sliding the Touch Menu right or left while touching it.
A Touch Menu
Display of the Touch Menu will disappear when no
touch operation is performed for a specific period of
time during recording of motion picture/still picture. To
display it again, touch .
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
T
W
MENU
HC-W580&W580M&V380EP&EB-SQT1145_mst.book 17 ページ 2015年12月18日 金曜日 午後2時24分