User manual

Table Of Contents
- 122 -
To save a manually-edited scene
You can save manually edited scenes as a single scene.
(For the / / / / )
The recorded scenes can be saved in the SD card.
(For the / )
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of a manually-edited scene or wait until the playback is
finished.
2 Touch [SAVE].
3 Select the format to save.
(When [AVCHD 1920k1080/50i] is selected)
Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.
Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.
4 Touch [YES].
If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].
5 (For the / / / / )
Touch [EXIT].
(For the / )
Touch [COPY] or [EXIT].
Scenes saved in the built-in memory can be copied to the SD card. To copy to the SD card,
select [COPY].
Operate according to the message and touch [EXIT] at the end.
You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.
Manually-edited scenes recorded as Backup for Twin Camera will be saved as normal AVCHD or
MP4 scenes.
For information on the approximate free space requirements for saving a manually edited scene,
refer to page 120.
[AVCHD 1920k1080/50i]: It will be saved in high-definition image quality.
[MP4 1280k720/25p]: It will be saved with an image quality, allowing you to upload it on
the Internet in higher image quality. The format supports playback
on a PC.
[MP4 640k360/25p]: It will be saved with an image quality, allowing you to upload it on
the Internet faster. The format supports playback on a PC.
WXF990
VXF990
VXF999
VX980
VX989
WXF990M
VX980M
WXF990
VXF990
VXF999
VX980
VX989
WXF990M
VX980M