User manual
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 189 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
≥ If you select [History], you can set up a Wi-Fi connection that uses the connection settings of a
previously used Wi-Fi function. (l 196)
∫ About the status indicator (l 9) and the connection status icon when
connected to Wi-Fi
≥ For information on how to set up a Wi-Fi connection for the Wireless Twin/Multi-Camera function,
refer to page 208; for information on the connection status icons, refer to page 217.
Wi-Fi
Setting Up a Wi-Fi Connection
Wi-Fi connection
methods
Connecting to a wireless access
point (l 191)
Setting up a direct connection to a
smartphone (l 194)
Available Wi-Fi
functions
≥ [Remote Ctrl] (l 162)
≥ [Baby Monitor] (l 168)
≥ [Hom.Monitor] (l 171)
≥ [DLNA Play] (l 176)
≥ [Copy] (l 178)
≥ [Live Cast] (l 182)
≥ [Remote Ctrl] (l 162)
A Lit green
≥ The status indicator is lit green while this unit is
connected to a destination device after completing a
Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit
red again.
B The connection status icon
When connected to wireless access point:
connected to Wi-Fi/ not connected to Wi-Fi
≥ The display will change as follows according to the
radio wave intensity: (Weak) # # #
(Strong).
When directly connected:
connected to Wi-Fi/ not connected to Wi-Fi