User manual
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 200 -
This setting controls whether or not a password is required when you directly connect this unit and a
smartphone to start remote operations or to use the Wireless Twin/Multi-Camera function.
≥ If you select [OFF], you can directly connect this unit and a smartphone without entering the
password for this unit’s SSID into the smartphone.
≥ If you select [OFF], you cannot set up a connection with [Easy Connection (WPS)] or [QR code].
Set up a connection by setting this unit’s SSID on the smartphone. (l 164, 208, 212)
≥ The default setting is [OFF]. If you perform [Reset Wi-Fi Settings], the default setting will be
restored. (l 45, 201)
You can use this unit as a Wireless Sub Camera.
For the connection procedure and other details, check the website below.
http://panasonic.jp/support/global/cs/e_cam
≥ This function is not available when [REC FORMAT] is set to [24p].
Please refer to page 203.
Please refer to page 175.
If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in
Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is
reduced.
≥ When the LCD monitor is turned off, you can display the screen by touching it.
≥ If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 15 minutes
later.
[Direct Connection
Password]
[ON]/[OFF]
[Wireless Sub Camera]
[LUMIX CLUB]
[Home Monitor Connect]
[ECONOMY (Wi-Fi)]
[ON]/[OFF]