User manual
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 47 -
The used space and remaining recordable time of the SD card and built-in memory can be checked.
≥ (For the / )
Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
≥ The remaining recordable time in the currently set Recording Mode is displayed only in the
Motion Picture Recording Mode.
≥ Any remaining recordable time exceeding 99 hours and 59 minutes will be displayed as
“99h59m+”.
≥ Touch [EXIT] to close the indication.
≥ The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this
unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
The firmware version of this unit is displayed.
You can update the firmware version of this unit.
This item is used to start the unit demonstration.
≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and
while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
≥ When Demo Mode is in operation, the lens cover remains open.
[MEDIA STATUS]
: [SETUP] # [MEDIA STATUS]
[Version Disp.]
: [SETUP] # [Version Disp.]
[Version Up]
: [SETUP] # [Version Up]
For the latest update information, check the support website below. (As of November
2015)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
[DEMO MODE]
: [SETUP] # [DEMO MODE] # [ON]
MENU
WXF990M
VX980M
MENU
MENU
MENU