User manual
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 96 -
This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one
appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit.
≥ The following functions will not work:
j Video light
j [AF ASSIST LAMP]
j Night Mode ([Infrared])
≥ In Motion Picture Recording Mode, [ZOOM MODE] (l 90) is fixed to [Opt.Zoom 10k] (up to
10k). In Still Picture Recording Mode, a zoom magnification of up to 10k is possible.
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 73)
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect, / /
/ is displayed.
≥ When [Normal] is set, will be displayed on the screen.
≥ This function’s default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode. (l 73)
≥ This function can be set only when using an external microphone.
[WIDE CONV. LENS SET]
: [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON]
[Wind Noise Canceller]
: [RECORD SETUP] # [Wind Noise Canceller] # desired setting
[Strong]: When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
[Normal]: This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]: Cancel the setting.
[LOWCUT]
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
MENU
MENU