Operation Manual

127
VQT2N35
VIERA Link does not
work.
[Setting on this unit]
≥ Connect with a HDMI mini cable (optional). (l 93)
≥ Press the MENU button, then touch [SETUP] #
[VIERA Link] # [ON]. (l 93)
≥ Turn the power to the unit off and then back on
again.
[Setting on other devices]
≥ If the TV input does not switch automatically, switch
the input using the TV remote control.
≥ Check the VIERA Link setting on the connected
device.
≥ Please refer to the operating instructions of the
connected device.
When connected by the
USB cable, this unit is
not detected by the PC.
≥ After re-inserting the SD card into the unit,
reconnect the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 108)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
The power of the DVD
burner cannot be
turned on.
≥ When the unit is connected to the DVD burner, use
the respective AC adaptors for both this unit and the
DVD burner.
Cannot see the PDF
operating instructions
for HD Writer AE 2.0.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer AE 2.0.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the
USB cable.
≥ Other equipment might have not recognised the SD
card. Unplug the USB cable once, and reconnect it.
Problem Check points