Operation Manual

VQT2N35

This item is used to start the unit demonstration.

(Only when the mode is at the or position)

If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration

automatically starts.

If [DEMO MODE] is switched to [ON] when there is no SD card inserted and while this unit is

connected to the AC adaptor, the demonstration automatically starts.

If any operation takes place, the demonstration is cancelled. However if no operations take

place for approx. 10 minutes, the demonstration automatically starts again. To stop the

demonstration, set [DEMO MODE] to [OFF] or insert an SD card.

This item is used to start the optical image stabilizer demo.

(Only when the mode is at the or position)

Touch [O.I.S. DEMO], the demonstration automatically starts.

When you touch [EXIT], the demonstration will be cancelled.

You can select the language on the screen display and the menu screen.

[DEMO MODE]

[OFF]/[ON]

[O.I.S. DEMO]

[LANGUAGE]

[English]/[Deutsch]/[Français]/[Italiano]/[Svenska]/

[Español]/[Polski]/[Česky]/[Türkçe]/[Magyar]