Operation Manual

VQT2N35

If the unit continues to be tilted upside down from the normal horizontal position while

recording motion pictures, it is automatically put into recording pause.

≥ Change the mode to .

≥ The AGS function may activate and cause the unit to pause the recording if you are

recording a subject right above or right below you.

You can record bright pictures even in dark places by slowing the shutter speed.

≥ Change the mode to .

≥ Switch to manual mode. (l 69)

≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.

≥ This function cannot be used in still picture recording mode.

≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed

and afterimages may appear.

Recording motion pictures with more vivid colours, using x.v.Colour

™

technology.

≥ Change the mode to .

≥ Switch to manual mode. (l 69)

≥ For more realistic colours, use an HDMI mini cable with a TV that supports the

x.v.Colour

™

≥ This function cannot be used when switch to Intelligent auto mode.

≥ When motion pictures recorded while this function is turned [ON] are played back

with a TV not compatible with x.v.Colour

™

, colours may not be reproduced properly.

≥ To play back images recorded in the digital cinema colour with vivid colours of wider colour

ranges, a device compatible with x.v.Colour

™

is required. When these images are played

back with devices other than ones compatible with x.v.Colour

™

, it is recommended to

record the images after this function is turned [OFF].

≥ x.v.Colour

™

is a name for devices that are compatible with the xvYCC format, an

international standard for expanded colour in motion pictures, and that follow the rules for

signal transmission.

[AGS]

: [RECORD SETUP] # [AGS] # [ON]

[AUTO SLOW SHTR]

: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]

[Digital Cinema Colour]

: [RECORD SETUP] # [Digital Cinema Colour] # [ON]