Operation Manual
63
VQT2N35
When recording, the input level from the built-in microphones can be adjusted.
≥ Change the mode to .
≥ Switch to manual mode. (l 69)
1 Select the menu.
2 Touch / to adjust the microphone input
level.
≥ Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to determine the microphone input level and then touch
[EXIT].
≥ (Microphone input level meter) appears on the screen.
≥ When switching to Intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
MENU
A Left
B Right
C Microphone input level