Operation Manual

91
VQT2N35
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
All information displayed
* This setting is only available in recording
mode.
≥ If the HDMI mini cable and AV multi cable
are connected at the same time, output
will be prioritised in order of the HDMI mini
cable, AV multi cable.
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
: [SETUP] # [TV ASPECT] #
[4:3]
[TV ASPECT] setting
[16:9] [4:3]
MENU
: [SETUP] # [EXT. DISPLAY] #
desired setting
MENU
Refer to the following support site for information about the Panasonic TVs that
you can directly insert an SD card into the SD card slot on the TV and then play it
back.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
Connecting with a HDMI mini cable
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080i]/[576p]
MENU